I knocked over one of our bedroom lamps walking around in the dark several months ago and it looked like this:
The lamp socket broke (the plastic thing that holds in the light bulb) at it's base. Now I wouldn't know what to do, but it's great having a handy hubs.
We picked up two new lamp sockets from Lowe's. Mr. F wanted a pull chain since he has a difficult time reaching up into the narrow lamp shade to turn on the light. He put new sockets on both lamps in our bedroom so they would match.
Here are his instructions for fixing a broken lamp socket. First, UNPLUG the cord from the wall. Really. Then, unscrew the top half of the socket.
Gently pull the remaining socket out a bit to get some slack in the cord.
Unscrew both terminals and take off both parts off.
Here you can see the bottom part that broke.
The wires are now ready for the new socket.
Now, put the bottom half of the NEW socket on...
...and screw it in place.
Notice that the new socket has a brass screw and a silver screw? The side of the wire with the ribs on it goes to the silver screw, and the smooth side of the wire goes on the brass screw. (this is Pam...all of you go look at your lamp cords right now...I never noticed that there were ribs on one side of the lamp cords, did you?)
Closeup of the ribbed wire hooked up to the silver screw. The exposed wire is wrapped around the screw and tightened.
Then, gently pull the cord at the base to pull the socket into the new base.
Lastly, the top half simply twists back on the bottom half. Put in the bulb and shade, then
This is Pam again...I think I can fix my own lamps now that I have the instructions on my blog. Hey, don't laugh...I changed the points in my car 27 years ago when I was stranded in downtown Los Angeles. I was able to do it because Mr. Fanatic showed me how a few days before because they had broken twice in the same week.
They never broke again after I fixed them...Maybe I will tell you the whole story someday.
Hope you have a fantastic Memorial Day weekend!
Good as new!! Have a great weekend Pam!ReplyDelete
Great lamps and the chain is such a good idea. Sometimes those shades are way tiny and so hard to reach under. Super handy hubby. Hugs, MartyReplyDelete
Joe and I repair lamps all the time as I sell about ten or more lamps a month. Every time I walk in the door with another lamp Joe asks if it is broken. I also rebuild broken ceramic pieces now. That is something I recently learned. We find nice lamp parts at Habitat For Humanity Restore sometimes. Great tutorial.ReplyDelete
Handy hubbies are the best!!! I have actually wired a lamp myself. You didn't know I was that handy, did you??? I can't garden, but I can wire a lamp! Ha! Have a great weekend!ReplyDelete
Great tips...might come in hand sometime. Thanks for the lesson. enjoy the Memorial week-end.ReplyDelete
That was a very concise and easy to follow tutorial! I'm sure it will come in handy for me and I know where to find it when I need it!! I liked the part about unplugging the lamp!! :)ReplyDelete
So handy, I can't tell you how many times this has happened!ReplyDelete
Thanks so much for the help! The instructions that came with the new socket made no sense to me at all! Thanks for making it so easy!ReplyDelete