How To Install Crown Molding On Full Overlay Cabinets

We spent a week at our Mountain Cottage a couple of weeks ago and one of the projects he finished was installing the crown molding on the cabinets. The cabinets we chose have a full overlay door style, which means that the doors and drawer fronts cover almost all of the 1 3/4" cabinet frame. 

Full overlay cabinet styles require a bit more work when installing crown molding.
Yep, that's just what Mr. DIY needs - more work.

Mountain Cottage Kitchen Reno - Building The Floating Shelves

Mr. DIY wasn't so sure about building floating open shelves in the kitchen at the Mountain Cottage. I grew tired of him saying he didn't know how the shelves could be strong without having more studs to screw them into.

I never doubted he could build them.

I showed him multiple photos of other bloggers who had built them.

He still doubted.

I told them he could add shelf brackets for added support.

He still doubted.

Here's how he made them:

First, he cut 1 x 1s out of a piece of stock material he already had.

Frames for the shelves were made  out of 1 x 1s

Shelves were then attached to the wall with 3" deck screws with a washer. Right return wall was attached with a molly bolt. Blue tape marks the studs.

1/2" birch veneer plywood was attached top and bottom. They were glued and nailed with 1 1/4" brads. The stick makes sure it's level as the glue dries.

After wrapping the edges with 1/4' thick poplar, the joints and nail holes were filled with wood putty.

Finishing is usually my job, but Mr. DIY primed and painted the shelves. He used Valspar Signature Ultra White in Satin. 

Our not so secret weapon so insure shelves won't stick...We apply this to any horizontal surface where something will placed.

I think the shelves turned out beautifully, don't you?
The shelves are very sturdy and strong and don't move when Mr. DIY yanks on them...
and set heavy bowls, pitchers and cake stands.

He's finally a believer!

There are more photos HERE if you missed my post a few days ago.

Mr. DIY built the banquette this week. Here's a sneak peek...

He finished constructing and adding the detail to the fronts and sides.

He should finish up painting the next time we come up. 

Then I'll have to make some pillows and cushions.

The hood is our last building project in the kitchen. 

We've been working on the kitchen reno for a long time and it will be good to get it finished!

Hope you have a great week!

Pam

Disclaimer: The above post is about how we built our floating shelves. We don't take any responsibility for any errors or results obtained from using this information. Using power tools can result in injury. When using power tools, use safety equipment.